Publications

Book

(1) Ren, D., Lens Design, in Encyclopedia of Optical Engineering. Marcel Dekker, Inc., New York, 2003 (ISBN 0-8247-4258-3)

 

Referenced Papers

  1. Deqing Ren and Yongtian Zhu 2007, “A Coronagraph Based on Stepped-Transmission Filters”. PASP  119, 1063
  2. Ren, D. and Wang H. 2006 “Spectral Subtraction: A New Approach to Remove Low and High Order Speckle Noise”, ApJ 640, 530
  3. Ren, D. and Serabyn, E. 2005, “A Symmetric Nulling Coronagraph based on a Rotational Shearing Interferometer,” Applied Optics 44, 7070
  4. Ren, D. and Ge, J. 2004, “An Advanced Image Slicer Integral Field Unit with Diffraction-limited performance for 3-D Imaging Spectroscopy,” PASP 116, 46
  5. Ren, D., Rimmele, T., Hegwer, S. and Murray, L. 2003, “A single-mode fiber interferometer for AO wavefront test”, PASP 115, 355
  6. Ren, D. and Allington-Smith, J.R. 2002, “On the application of IFU Design theory for imaging spectroscopy”, PASP 114, 866
  7. Lee, D., Haynes, R., Ren, D. and Allington-Smith, J.R. 2001, “Characterization of lenslet arrays for astronomical spectroscopy”, PASP 113, 1406
  8. Ren, D., Sharples, R., Allington-Smith, J.R., Dodsworth, G.N., Robertson, D.J. and Dalton, G. 2001, “Design and construction of a fiber bundle connector using microlenses”, Optical Engineering 40, 2709
  9. Ren, D. and Allington-Smith, J.R. 1999, “Apochromatic lenses for near-infrared astronomical instrument”, Optical Engineering 38, 537
  10. Ren, D. 1997, “all-reflective infrared camera”, Infrared Technology, No.2
  11. Ren, D. 1994, “High performance infrared mini-scanner”’, Infrared Technology, No.6
  12. Ren, D. 1991, “Computer 3-D solid model for infrared opto-mechanical system design”, Infrared Technology, No.0
  13. Ren, D. 1990, “The fatigue calculation of harmonic gearing”, Mechanical Design and Study, No. 4
  14. Ren, D. 1990, “The fatigue life analysis of the bearing for harmonica gearing”, Bearing, No.3

 

Conference Papers

  1. Ren, D. & Serabyn, E. 2006, “Estimated performance of a symmetric nulling coronagraph for exoplanet imaging,”  Proc. SPIE, 6265, 119
  2. Ren, D., Keller, C. and Plymate, C. 2006, “Development of an IFU for diffraction-limited 3-D spectroscopy and polarimetry,”  Proc. SPIE, 6269,191
  3. Ren, D. , Keller, C. and Plymate, C. 2006, “An IFU for Diffraction-Limited 3-D Imaging Spectroscopy  and Polarimetry,” NOAO/NSO Newsletter (NOAO/NSO Newsletter 85, 2006 March Issue)
  4. Kasdin, N. J.; Vanderbei, R. J.; Littman, M. G.; Ren, D.; Carr, M.; Spergel, D. N. 2004, “Optimal Designs, Mask Manufacture, and Experimental Results for Shaped Pupil Coronagraphs” AAS, 205, 514
  5. Van Eyken, Julian C.; Ge, Jian; Mahadevan, Suvrath; DeWitt, Curtis; Friedman, Jerry;  Finnerty, Padraic; Ren, Deqing; Zugger, Mike, “Results from upgrades to the radial velocity instrument, ET, at the KPNO 2.1 m”  Proc. SPIE,.5492, 445
  6. Ge, Jian; Mahadevan, Suvrath; van Eyken, Julian C.; DeWitt, Curtis; Friedman, Jerry; Ren, Deqing 2004, “All-sky extrasolar planet searches with multi-object dispersed fixed-delay interferometer in optical and near IR,” Proc. SPIE,.5492, 711
  7. Ren, D., Allington-Smith, J.R. et al. 2003, “The design and construction of a Multiple-Integral-Field-Unit for 8-meter Telescopes”, Proc. SPIE, 4842, 384
  8. Ren, D., Hegwer, S. and Rimmele, T. R. et al. 2003, “The optical design of a high order adaptive optics for the NSO Dunn solar telescope and the Big Bear solar observatory”, Proc. SPIE,4853, 593
  9. Keil, S. L., Rimmele, T. R., Keller, C. U., Hill, F., Radick, R. R., Oschmann, J. M., Warner, M., Dalrymple, N. E., Briggs, J., Hegwer, S. L.; Ren, D. 2003, “Design and development of the Advanced Technology Telescope (ASTST),” Proc. SPIE, 4853, 240
  10. Didkovsky, L, Dolgushyn, A., Marquette, W., Hegwer, S., Ren, D. Fletcher, S. Richards, K., Rimmele, T. R. Denker, C. and Wang, H. 2003, “High-order adaptive optical system for Big-Bear Solar Observatory, Proc. SPIE, 4853, 630
  11. Ren, D. and Hegwer, S. 2003, “Image Slicer Integral Field Unit for Solar Telescope”, Proc. SPIE, 4853, 551
  12. Rimmele, T. R., Keil, S. L., Keller, C. U., Hill, F., Briggs, J., Dalrymple, N. E., Goodrich, B. D., Hegwer, S. L.; Hubbard, R., Oschmann, J. M., Radick, R. R.; Ren, D., Wagner, J., Wampler, S., Warner, M. 2003, "Technical challenges of the Advanced Technology Solar Telescope", Proc. SPIE, 4837, 94
  13. Rimmele, T. R., Richards, K., Hegwer, S. L., Ren, D., Fletcher, S.; Gregory, S., Didkovsky, L. V., Denker, C. J., Marquette, W., Marino, J., Goode, P. R. 2003, “Solar adaptive optics: a progress report”, Proc. SPIE, 4839, 635
  14. DeWitt, C., Ge, J., Mahadevan, S., Van Eyken, J., Ren, D. & Friedman, G 2003, “New Results from the RV instrument, Exoplanet Tracker, at the KPNO 2.1m,” AAS 203, 1702
  15. Van Eyken, J.C., Ge, J., Mahadevan, S., DeWitt, C, Ren, D. 2003, “First planet confirmation with the exoplanet tracker”,  Proc. SPIE, 5170, 250
  16. Jian Ge, Deqing Ren, Jonathan I. Lunine, Robert, H. Brown and Roger. V. Yelle and Laurence A. Soderblom 2003, “Compact high-resolution 3D imaging spectrometer for discovering oases on Mars”, Proc. SPIE,4859, 45
  17. Ge, Jian; Chakraborty, Abhijit, Debes, John H.; Ren, Deqing; Friedman, Jerry, 2003 “Design and Performance of a Versatile Penn State near IR Imager and Spectrograph”, Proc. SPIE,4841, 1503
  18. Maihara, T., Ohta, K., Tamura, N., Ohtani, H., Akiyama, M., Noumaru, J., Kaifu, N., Karoji, H., Iye, M., Dalton, G.B., Parry, I.R., Robertson, D.J., Sharples, R.M., Ren, D., Allington-Smith, J.R., Taylor, K., Gillingham, P.R., 2000, “Fiber-Multi-Object Spectrograph (FMOS) for Subaru telescope”, Proc. SPIE, 4008, 1111
  19. Allington-Smith, J, Content, R., Dodsworth, G., Murray, G., Ren, D., Robertson, D., Turner, J., Webster, J., 2000, “Integral field spectroscopy with Gemini multi-object spectrograph”, Proc. SPIE, 4008, 1172
  20. Ren, D., Allington-Smith, J.R. and Rauscher B.J. 1997, “Compact all-reflective IR spectrograph and imager for UKIRT”, Proc. SPIE, 3122, 280
  21. Carrasco, B.E., Vazquez, S. Ren, D., Sharples, R.M., et. al. 1998, “Multi-fiber spectroscopy at Observotorio Guillermo Haro”, Fibre Optics in Astronomy III, 152 edited by S. Arribas
  22. Dalton, G., Parry, I., Allington-Smith, J.R., Sharples, J., Ren, D., et. al. 1999, “FMOS: a fiber-fed spectrograph for Subaru”, FMOS Design Document
  23. Ren, D. 1991, “Computer 3-D solid model for infrared opto-mechanical system design”, Infrared Technology, No.0
  24. Ren, D. 1990, “The CAD method for infrared opto-mechanical system design”, Proceeding of Ninth National Infrared Science and Technology, China
  25. Xi, R. and Ren, D. 1992, “Strain fatigue analysis of bolt under axial loading”, CJISF’ 92 Fastener and Fastening, International Academic Publisher
  26. Xi, R. and Ren, D. et al. 1992, “Fatigue analysis of 30GrMnSiA bolt”, CJISF’ 92 Fastener and Fastening, International Academic Publisher
  27. Ren, D. and Zhang, S. 1988, “The fatigue analysis of bearing for harmonic gearing”, Proceeding of Fourth National Harmonica Gearing, China