LAPTOP USERS
- Turn on the projector using the Epson remote control - Remotes are inside the black box drawer.
- Press “Comp2” on the remote
- Connect your laptop's VGA output to the VGA input wall plate. You will need VGA cable provided by your department.
- Connect laptop to data port to use internet. Network cable is provided by your department
- To us audio, connect computer to PC audio input on wall plate *and* Turn on amplifier and select “PC audio”. Speaker selection must be on “A”. Adjust the volume on the amplifier as necessary (probably somewhere between 40 and 74---- 74 being the maximum). Note*** You will need a key to the black box if you need to use the audio jack. Audio cable is provided by your department.
* Special Note*
COBAE Departments Provide wiring harness that include VGA, Audio and Network cable for laptop users.
If your not a COBAE Faculty or Staff member, please contact your department IT support group.