Guidelines for Effective Use of Maps and Graphics at Professional
Meetings
General
Structure your presentation around the graphics. A carefully
prepared set of graphics can serve as lecture text, notes,
reminders, and as an aid to keeping the presentation on
schedule.
Prepare your presentation beforehand. Hours of intellectual
work can be ruined for the lack of only five minutes spent
checking the order of transparencies, making sure that slides
are the right way up, or that you do not have too many graphics
to show in the time available. Be suye to rehearse and time
yourself.
Make use of the speaker preparation room. Arrive for your
session early enough to check the room size and the slide
projector or overhead projector. Make sure you understand how
to focus the projector and advance the slides. Plan on a
forward only sequence. Do not go backwards - duplicate a slide
you wish to refer back to and place the copy in sequence in the
presentation.
Check your local copy shop. Color transparencies are now cheap.
Reduction and enlargement are easy and copy quality is very
high. Many service agencies will take computer files on disk
and send back slides at little expense. Ask a cartographer or
your local print or copy shop for the name of a reputable slide
service bureau. Many work at short notice, and some are even
able to accept files electronically (either by maintaining a BBS
or via the Internet).
Make sure the session chair and student helper are aware that
you are present and what your needs are for the presentation so
that they can help change transparencies, hook up a microphone,
or dim the lights at the right time.
Begin your presentation with a slide showing your paper title,
name, affiliation, collaborators and acknowledgments. This
serves to kick off the presentation, allows you to get into your
pace, and is a handy way of keeping the audience aware of which
paper they are hearing.
Text
Text slides should have contrasting foreground and background.
Complex logos and figures added to text slides can distract from
the text.
Use a minimum 14 point type (there are 72 points to the inch),
with no more than seven "items" or bullets per slide. Use
condensed form, not full sentences, for bullets.
Do not use more than two fonts or colors on a slide. Use bold
type, italics, underlining or color to draw the audience's
attention to ideas you want to highlight.
Color can add interest and attractiveness, but avoid garish
colors, cold colors (e.g., blue), disappearing colors (e.g.,
yellow) and colors at opposite ends of the spectrum which "jump"
(e.g., red on green). Also, be aware that a portion of the
males in the audience may have red/green/brown color blindness.
These colors should not be placed on top of each other because
they will not stand out, but depending on their intensity, will
blend into each other (e.g., a red dot on a green background
will not be seen).
Include a text slide after the first title slide that outlines
the structure of your presentation. Use the old maxim - say
what you are going to say, say it, then tell the audience what
you said. Finish your presentation with a conclusion or summary
slide. Try to end your presentation by fitting your work into
the big picture.
If a graphic is important enough to use, leave it on the screen
long enough for the audience to read it. Do not remove the
graphic and talk to a blank screen.
Your graphics represent a significant investment in your time
and effort. Take the time to use them correctly and effectively.
Tables
Tables are a major source of presentation complaints. Use only
a few rows and columns. Label all columns with meaningful
labels. Include measurement units where necessary, such as
degrees Celsius, meters, people per square kilometers, etc.
Metric units are preferred. Use color, italics, underline or
bold face to highlight numbers of importance, especially if you
want to draw the audience's attention to them while you are
talking.
The table should not fill the whole display area. Leave large
gaps at the edges to allow for low screens and obstructed views.
If you cannot understand your graphic - neither will your
audience. Keep it simple and sparse. If necessary use two
simple tables or two slides rather than one complex one.
Is the table really necessary at all? Perhaps the data could be
better presented as a chart or graph. With little extra effort,
there will be a massive improvement in clarity.
Charts and Histograms
Make sure that charts are simple and readable. Axes should be
labeled and units should be included. Use the 3D effect
included with many presentation graphics packages spaingly. The
best chart is simple, delivers its main point quickly, and is
not overbearing. A sparse but well constructed chart looks
professional and efficient. A gaudy overdone chart does not
communicate well.
Even if the chart makes a clear point, repeat the point in clear
English on the graphic. A little overstatement never hurt.
Graphs
Place no more than four simultaneous symbols, values or lines on
a graph. make each line or symbol clearly distinguishable from
the rest and label it prominently. Label axes, include an
appropriate number of reference ticks and label their values in
a logical manner, e.g., 0, 10, 20, 30 not 0.001, 5.397, 6.256,
etc.
Make the lines sufficiently bold as to be visible from a
distance. Use color if possible. Avoid cross hatching and
diagonal shading on graphs. Too little shading always works
better than too much shading.
Maps
If a map exists that meets your specifications, use it! Do not
use home drawn graphics if superior profession maps already
exist. You can still add emphasis or highlight a feature with
color. Do not violate map copyrights. However, USGS and all
Federal government maps are public domain and may be copied
freely.
Consult a cartographer. S/he may be able to point you to
software/clip art or presentation tools, and may be willing to
critique your graphics, if asked.
Typically, maps should include scales, graticules, projections,
sources, dates, titles and legends. Consult a cartography text
for design guidelines.
Remember that geographers are expected to know maps. Try to
avoid blunders like out-of-date reference maps, typos in place
names, or mislabeled projections or scales.
FINALLY
Don't put yourself in the postition of having to apologize for
poor graphics. Common sense and attention given to the topics
covered in these guidelines will assist greatly in creating a
professional presentation.
Thanks to Dennis Fitzsimons for updating these guidelines.